Little modification

Little modifications that will more suitable for your body

Increase or decrease the pouch capacity of underwear or swimwear

• Take the most protruding position of the bulge type pouch as the reference point, ±1cm x 2 means to increase/decrease 1cm the depth of pouch on the left and right sides each. Maximum do not exceed 2cm x2, it will be different from the original shape.
• For non-bulge type, the widest or center position of the front will be the reference place, ±1cm x 2 means to increase/decrease 1cm the width of pouch on the left and right sides each.
• Please note your requirements in the [Order Remarks] column during checkout, for example: [Pouch +1cm*2] or [Pouch -1cm*2].
• Note: 2cm x2 is only available for bulging pouches with a complete seam from the middle of the waist. General pouch or others only available 1cm x2.

Changing the height of the back piece of underwear or swimwear

• iSwim's underwear and swimwear back pieces are available in 4 heights, such as standard thongs: T0 - low rise, T1 - super low rise, T2 - ultra low rise, and T3 - extreme low rise. As shown in the picture above, the height difference between T1 and T2 is about 1 inch. The highest T0 is about 2cm higher than T1, and the lowest T3 is about 2cm lower than T2. T1 and T2 are the most common heights, and Y-thongs takes Y1 and Y2 as the most common heights.
• Assume that the back piece code in the original product number is [-Y2] ultra low rise Y-thong. If you want the height at the back to be higher, you can make a note in the [ORDER REMARKS] column during checkout, for example : [24s1020-Y2 change to Y1], we will change it to Y1-super low rise thong for you.
• If the last code of the back piece code is 4 5 6 7, it is a special style. For example, B5 is B1 with wrinkled, and A7 is A3 with wrinkled. If the original order is 0 1 2 3 and you want to change it to a special style such as 4 5 6 7, etc., additional production costs must be charged (different styles have different prices).
• All thong styles (including C T Y V) only provide height changes (such as changing Y2 to Y1), and do not provide direct changes to special styles. Y5 is a special narrow-bottomed thong of Y1, and Y6 is a special narrow-bottomed Thong of Y2. Generally, Y-thong does not provide a direct change to a special narrow-bottomed thong, but Y5 or Y6 are interchangeable only in height.
• M-shaped thong (such as M1 M8) is an independent thong style and no changes are provided.
• The back pieces at the same price range can be changed to each other, only F B H A C T D back pieces are available. Example 1: If you like to wear C1 (capri thong, brazilian style thong), but that style does not provide C1, you can directly order the back piece to be F1 B1 H1 A1 T1 D1, and then make a note to change the back piece to C1. Example 2: If you like to wear B5 or B6 back wrinkled bikini, but this style does not provide B5 or B6, you can directly order the back piece to be F5 H5 A5 or F6 H6 A6, and then make a note to change the back piece to B5 or B6. Remind you that any addition of wirinkle to the back piece that does not already have wrinkles will incur additional production costs.
• Taking advantage of our standardized and more diverse combination designs, your underwear or swimwear may become unique and more in line with your personal preferences.
• If there is anything missing from the above, you are welcome to leave a message on the website and we will reply to you as soon as possible within 24 hours.
• If the back piece you want to change will increase the production cost, please do not pay after order submitted. Please wait for our staff to modify the order for you, and then return to the member center to make payment later.

Increase or decrease the waist of thin/string sides underwear

• The 1.5cm thin sides and 0.8cm strings underwear are using 0.6cm elastic band, it can be increased or decreased the waist length to improve the fitting of waist and legs. ±1cm x 2 means to increase/decrease 1cm on the left and right sides of the front and back pieces each, the total waist circumference will ± 4cm (about 1.5 inches)
• Please note your requirements in the [Order Remarks] column during checkout, for example: [Waist +1cm*2] or [Waist -1cm*2].
• Assume that the underwear with a thin-sides 1.5cm fits well. The 0.8cm strings underwear of the same size will be slightly tighter than the 1.5cm thin-sides . If you are first time to buy 0.8cm strings underwear. You may wish to note [waist + 1cm*2] to slightly increase the waist and leg circumference

Increase or decrease the elastic band length of wide waist band underwear

• The wide waist band underwear uses 2cm or 1 inch elastic bands, usually there are special joint or no splicing design on both sides of the underwear. Therefore, increase or decrease in fabric is not provided, only an inch increase or decrease in elastic length at the waist.
• Please note your requirements in the [Order Remarks] column during checkout, for example: [Elastic band +1 inch] or [Elastic band -1 inch].

Increase or decrease the waist of the thin/string sides, For size S / XXL of swimwear only

• The 1.5cm thin sides and 0.8cm strings swimwear are using international A+ grade rubber band, only the smallest size S can reduce waist circumference, and the largest size XXL can increase waist circumference.
• The S size of swimwear is reduced by 1cm x2, which is approximately equivalent to the size of XS. When the XXL size increases by 1cm x2, it is equivalent to XXXL.
• ±1cm x2 means to increase/decrease 1cm on the left and right sides of the front and back pieces each, the total waist circumference will ± 4cm (about 1.5 inches).
• Please note your requirements in the [Order Remarks] column during checkout, for example: [Waist +1cm*2] for size XXL, or [Waist -1cm*2] for size S.

Waist circumference modification is not available for wide waistband swimwear

• Wide waistband swimwear uses 2cm width rubber band, due to the cutting issue, we do not provide any increase/decrease in rubber band length or fabric.

Notice of Little Modification

• Little modifications can only be used for semi-customized ordering, not applicable to pre-made or stock products.
• The size washing label will keep the original.
• The small modification was originally only open to VIP members and above, because we sell to more than 60 countries around the world and have many different body types, therefore we started opening it to all members since November 2018.
• Due to limited manpower, since June 2011, modifications that must be made separately pattern is not accepted (for example: waist height, hip width, combination of different styles, etc.), only little modifications to the waist circumference and front pouch are accepted.
• The little modification is not tailor-made, and there will be some differences in the wearing of different fabrics. After shipment, we will not accept any replacement requirements that do not meet the requirements. There is no additional charge for little modifications, but please be sure to read the instructions and cooperate carefully. This site will adjust or terminate the service depending on the situation.

The above content was last revised on July 29, 2024